unisonic technologies co., ltd 2N6027 preliminary scr www.unisonic.com.tw 1 of 3 copyright ? 2013 unisonic technologies co., ltd qw-r301-022.a programmable unijunction transistor ? description the utc 2N6027 is a programmable unijunction transistor, it uses utc?s advanced technology to provide customers with low forward voltage, low gate to anode leakage current, low offset voltage and high peak output voltage, etc. the utc 2N6027 is suitable for timing, thyristor-trigger, oscillator and pulse circuits, etc. ? features * low forward voltage * low offset voltage * low gate to anode leakage current * high peak output voltage ? symbol to-92 1 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 2N6027l-t92-b 2N6027g-t92-b to-92 a g k tape box note: pin assignment: a: anode, g: gate, k: cathode
2N6027 preliminary scr unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r301-022.a ? absolute maximum ratings (t j =25c, unless otherwise noted) parameter symbol ratings unit * power dissipation p f 300 mw derate above 25c 1/ ja 4.0 mw/c * dc forward anode current i t 150 ma derate above 25c 2.67 ma/c * dc gate current i g 50 ma repetitive peak forward current 100 s pulse width, 1% duty cycle i trm 1.0 amps * 20 ms pulse width, 1% duty cycle 2.0 amps non?repetitive peak forward cu rrent 10 ms pulse width i tsm 5.0 amps * gate to cathode forward voltage v gkf 40 volts * gate to cathode reverse voltage v gkr -5.0 volts * gate to anode reverse voltage v gar 40 volts * anode to cathode voltage (note 1) v ak 40 volts operating junction temperature range t j ?50 to +100 c * storage temperature range t stg ?55 to +150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. * indicates jedec registered data. 1. anode positive, rga =1000ohms anode negative, r ga =open. ? thermal characteristics parameter symbol ratings unit junction to case jc 75 c/w junction to ambient ja 200 c/w maximum lead temperature for soldering purposes (<1/16? from case, 10 secs max) t l 260 c ? electrical characteristics (t c =25 ? c unless otherwise noted) parameter symbol test conditions min typ max unit peak current (note 2) i p v s =10vdc, r g =1m ? 1.25 2.0 a v s =10vdc, r g =10kohms 4.0 5.0 a offset voltage (note 2) v t v s =10vdc, r g =1m ? 0.2 0.70 1.6 volts valley current (note 2) i v v s =10vdc, r g =1m ? 18 50 a v s =10vdc, r g =10kohms 70 150 a v s =10vdc, r g =200ohms 1.5 ma gate to anode leakage current (note 2) i gao v s =40vdc, t a =25c, cathode open 1.0 10 nadc v s =40vdc, t a =75c, cathode open) 3.0 nadc gate to cathode leakage current i gks v s = 40vdc, anode to cathode shorted 5.0 50 nadc forward voltage (note 1, 2) v f i f =50ma peak 0.8 1.5 volts peak output voltage (note 2) v o v g =20vdc, c c =0.2 f 60 11 volt pulse voltage rise time t r v b =20vdc, c c =0.2 f 40 80 ns notes: 1. pulse test: pulse width 300 sec, duty cycle 2%. 2. indicates jedec registered data.
2N6027 preliminary scr unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r301-022.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
